Toorcamp Badge Instructions
August 10, 2009
by Pavel
0 comments
For my fellow Toorcampers, here are the badge soldering instructions in case you lost or never got them:
- Solder 10pf capacitor (the one with the pink line) into the holes labeled 1.
- Solder the 22nf capacitor into the holes labeled 2.
- Solder the LEDs into the holes labeled 3.
- Solder the jumper into the holes labeled 4.
Notes: When the jumper is to the left, the left LED will light up when 13.56mHz is detected. When the jumper is to the right, the right LED will light up when 125kHz is detected.
Check out Mike Ossmann’s excellent hack for the badge, turning it into an RFID decoder using a standard sound card and analysis software.